Mackie MR4T Spec Sheet - Page 2
MR4/4T
View all Mackie MR4T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
MR4T SPEAKER MR4/4T Compact Two-Way Speaker Specifications System Freq. Range (-10 dB): Freq. Response (-3 dB): Horz. Coverage Angle (-6 dB): Vert. Coverage Angle (-6 dB): Directivity Factor; Q (DI): System Sensitivity1: Rated Maximum SPL: System Input Power Rating2: System Nominal Impedance: Recommended Amplifier3: Constant Voltage: Power Taps: Crossover: 75Hz-21kHz 160Hz-18kHz 120° averaged 800Hz to 16kHz 100° averaged 800Hz to 16kHz 5.6 (7.5) averaged 800Hz to 16kHz 88 dB, 1W @ 1m 109 dB, @ 1m 60W IEC, 240W Peak 4Ω (bypassed) 250W 25V, 50V, 70V, 100V 1W, 5W, 10W, 20W, 30W 4kHz Transducers Low-Frequency: High-Frequency: 5" (130mm) carbon fiber woofer Horn loaded 0.5" (12.7mm) dome tweeter, ferrofluid cooled Physical Enclosure: 45° back angles, high density polystyrene Attachment Inserts: 2 points M6 threaded on back 2 points 3/8" threaded on top and bottom Color: Matte black, white (MR4WT), scratch resistant paint Grille: Matching perforated steel grille Input Connectors: Push connector plate Dimensions (HxWxD): 10.32" x 7.17" x 6.57" (262mm x 182mm x 167mm) Net Weight: 6.6 lb. (3 kg) Options MA 5-6 MA 5-7 MA 5-9, MA 5-9W MA-7B, MA-7W Plate for suspending 4 clustered speakers, black Speaker tilt bracket for MA 5-6, black U-bracket, black (W-white) Wall-mount support bracket (B-black, W-white) 1 Measured on axis in the far field with 1 watt (2.00 V RMS, 4)input and referenced to 1 meter distance using the inverse square law. Listed sound pressure represents an average from 300Hz to 3 kHz. 2 IEC Spectrum, Peak for 2 hours with +4.5 dB crest factor. 3 Recommended Amplifier is a power capability value that should be taken as a guide. 2 O FoF66 PPAAGEGSE S