Mackie PA-CX81/W Spec Sheet - Page 1

SPEAKER PACX81 PACX81 Vision Series I The model PACX81 (black) and PACX81W (white) are professional full-range, ultra-compact coaxial loudspeaker systems providing wide bandwidth and light weight in a low profile enclosure. The coaxial configuration of the transducers in the PACX81 provides an ideal acoustic point source, yielding smooth frequency and phase response throughout its coverage pattern. The asymmetric cabinet design allows multiple applications including use as a floor or ceiling monitor. I The coaxial speaker consists of an 8" high-output carbon fiber woofer with a 2" voice coil, combined with a back-mounted titanium dome high frequency transducer suitable for difficult climatic environments. I The system includes a high-level crossover network that features markedly lower (than conventional) induction values in series with the woofer. We call this innovation LICC (Low Impedance Compensated Crossover). The benefit is delay reduction, reduced phase shift and superior transient response. Dynamic high-frequency driver protection is accomplished with a fast-response filament resistor, chosen to complement the power curve of the driver. I The Mackie Industrial PACX81 is a part of the VISION family of loudspeaker products including fullrange, cost-effective, two-way loudspeakers and complementary subwoofer cabinets. These enclosures have a trapezoidal footprint for easy array configuration. All enclosures are constructed using 19mm voidfree, birch plywood and finished with a scratch-resistant black or white coating. Transducer components are protected from the environment by a heavy gauge metal grille with open-cell poly fiber backing. The VISION products are eminently suited for fixed installation, ready for suspension via built-in M10 inserts with metal reinforcement and forged shoulder eyebolt hardware. The PACX81 also includes M8 inserts. I This Mackie Industrial product is covered by an exclusive, one-time, NO FAULT repair policy in addition to a five year limited warranty. Coaxial, Two-Way Speaker System PACX81 Features I Aligned coaxial speaker, using an 8" high-output woofer and a cone loaded titanium dome tweeter I Built-in LICC (Low Impedance Compensated Crossover) crossover I HF driver dynamic protection I Asymmetric trapezoidal enclosure for multiple configurations I 13 ply birch plywood construction I Internal Inserts (M10 and M8) and eyebolt suspension hardware I Exclusive Mackie Industrial - one-time, NO FAULT repair policy I Five year limited warranty I Cluster Configurations I Distributed Systems I Zone Delay and Fill Systems I Floor Monitor APPLICATIONS 1 O FoF66 PPAAGGESE S