Mackie S215 Owner's Manual - Page 3

INTRODUCTION Thank you for choosing the Mackie S215 sound reinforcement loudspeakers. The S215 is a professional two-way loudspeaker system, designed to complement our professional powered mixers and power amplifiers. They are capable of extremely high sound pressure levels, and designed to give you the best performance of any loudspeaker in its class and price range. Connecting and setting up the S215 is a breeze. It accepts a speaker-level signal via either a Neutrik Speakon® connector or female 1/4-inch TS (Tip/Sleeve) connector. The cabinet is constructed using both 18 mm multilayer plywood and pressure injected structural resin. A carrying handle is integrated into each side for easy loading and transport. The S215 features a 15-inch high-power low-frequency woofer and a 1.75-inch titanium diaphragm high-output compression driver. The woofer incoporates technology used in large-format touring systems and, with a precision 2.5-inch high-temperature voice coil, is virtually indestructible. CONTENTS IMPORTANT SAFETY INSTRUCTIONS 2 INTRODUCTION ...3 HOOKUP DIAGRAMS ...4 Quick-Start...4 CONNECTIONS ...6 PLACEMENT ...6 Room Acoustics ...6 SERVICE INFORMATION ...8 Warranty Service ...8 Troubleshooting ...8 Repair ...8 CARE AND MAINTENANCE ...9 S215 SPECIFICATIONS ...9 S215 LIMITED WARRANTY ...11 Don't forget to visit our website at www.mackie.com for more information about this and other Mackie products. Part No. 0013879 Rev. B 06/05 3 ©2004-2005 LOUD Technologies Inc. All Rights Reserved.