Mackie S500 Owner's Manual - Page 4
Specifications - manual
View all Mackie S500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Have your loudspeaker's serial number ready. You must have an RA number before you can obtain service at the factory or an authorized service center. 2. Keep this owner's manual. We don't need it to repair the loudspeaker. 3. Pack the loudspeaker in its original package, including protective wrap, endcaps, and box. This is very important. When you call for the RA number, please let Tech Support know if you need new packaging. Mackie is not responsible for any damage that occurs due to non-factory packaging. 4. Include a legible note stating your name, shipping address (no P.O. boxes), daytime phone number, RA number, and a detailed description of the problem, including how we can duplicate it. 5. Write the RA number in BIG PRINT on top of the box. 6. Ship the loudspeaker to us. We suggest insurance for all forms of cartage. Ship to this address: Mackie Designs SERVICE DEPARTMENT Building #11 One Main Street Whitinsville, MA 01588 7. We'll try to fix the loudspeaker within three to five business days. Ask Tech Support for the latest turnaround times when you call for your RA number. The product MUST be packaged in its original packing box and have the RMA number appear on the box. Once it is repaired, we'l ship it back the same way in which it was received. This paragraph does not necessarily apply to non-warranty service. SPECIFICATIONS Transducer Specifications Low-Frequency Transducer Diameter 15˝ (381 mm) Voice Coil Diameter 2.5˝ (64 mm) High-Frequency Driver and Horn Diaphragm Diameter 1.75˝ (44 mm) Voice Coil Diameter 1.75˝ (44 mm) Diaphragm Material Titanium Power Handling 30 watts RMS (long term) Horn Type Mouth Size Throat Size Constant Directivity 10.6˝ (269 mm) W x 10.6˝ (269 mm) H 1.0˝ (25 mm) System Specifications Frequency Range (-10 dB) 50 Hz-22 kHz Frequency Response (-3 dB) 75 Hz-20 kHz Horizontal Coverage (-6 dB) 75º averaged 1 kHz-10 kHz Vertical Coverage (-6 dB) 65º averaged 1 kHz-10 kHz Directivity Factor; DI (Q) 10.93 (12.38) averaged 2 kHz-10 kHz Sensitivity (1W@1m) 100 dB Rated Maximum SPL@1m 124 dB long term 127 dB peak Crossover Point 1300 Hz Nominal System Impedance 8 ohms Power Handling 250 watts RMS Safety Features High Frequency: Monitoring and limiting of continuous input power via MOSFET-based electronic circuit Low Frequency: Monitoring of amplifier signal delivered to woofer via current breaker switch. Overpowering of woofer opens circuit and requires resetting by pressing the circuit breaker button. Physical Properties Height 32.1˝ (817 mm) Front Width 19.1˝ (484 mm) Rear Width 13.9˝ (353 mm) Depth 18.1˝ (460 mm) Net Weight 75 lbs. (34 kg) Connector Type 1/4˝ TS jack and Neutrik Speakon Enclosure Geometry Trapezoidal, 10º side angles, 18 mm multi-layered plywood, top and bottom high pressure resin injected "caps" Handles One on top, one on bottom cap, two three-piece handles on each side Color Black, PVC coated finish Grille Custom perforated oval steel grille with anti-corrosive treatment Disclaimer Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice. "Mackie" and the "Running Man" figure are trademarks or registered trademarks of Mackie Designs Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged. ©2003 Mackie Designs Inc. All Rights Reserved. 4