Macrom M-OF7020 User Manual (English) - Page 22

Other modes Listen to other devices You can connect an external audio/video device to the unit. 1. Connect the car audio to the device with the supplied AV cable. 2. Press [SRC] button on the front panel to display the media source menu. 3. Touch [Aux]. 4. Operated the connected the device(see the instructions manual of the device). Reset When the unit hangs up, you can reset it. Press RESET hole with a ball-point pen or similar tool. Tip When the unit is reset, all the settings are reset. Reset Remove the unit To repair, replace fuse, or replace the unit with another car audio, remove it from the dashboard. 1. Take off the trim plate. 2. Screw off the four screws on the left/right side of the unit. 3. Pull the unit out from the dashboard. Replace fuse If there is no power,the fuse may be damaged and need to be replaced. 1. Take out the unit from dashbpard. 2. Check the electric connection. 3. Buy a fuse that matches the voltage of the damaged fuse. 4. Replace the fuse. GPS 1. Press [NAVI] button on the front panel, the navigation menu is display in a few seconds. 2. Refer to the iGO Primo navigation software manual to operate the navigation tool. Rear Zone 1. Press [MENU] button on the front panel. 2. Touch [Rear Zone] on the menu. 2. Select a playing source for rear zone. Tip To use rear zone, is necessary to connect added monitors to two video output REAR VIDEO OUT 1 and/or REAR VIDEO OUT 2. 21