Magellan Maestro 4200 Manual - English - Page 58
Setting Tone Options, Viewing Technical GPS Information, Setting the GPS Position, User Options
UPC - 763357117974
View all Magellan Maestro 4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Tap Stop to end simulating the current route you are simulating. (The Simulate button is presently not active.) 4. Tap Back arrow to record the changes and exit. Setting Tone Options Provides a way of selecting the tone used to announce arrival at a maneuver or destination. 1. From page 2 of the Main Menu, tap User Options. 2. Tap Tone Options. 3. Select Bell, Chime or Beep. 4. Tap Save to record the changes and exit. Viewing Technical GPS Information This screen provides technical information about the satellites being used to compute the GPS position. 1. From page 2 of the Main Menu, tap User Options. 2. Tap GPS Options. 3. Tap GPS Status. PRN: pseudo random number that identifies the satellite AZ: Azimuth of the satellite EL: Satellite elevation SNR: Satellite signal-to-noise ratio TTFF: Time to First Fix (in seconds) 4. Tap Back arrow to exit. Setting the GPS Position Setting a GPS position is useful if you are not getting satellite information quickly because the Magellan Maestro has travelled over 500 miles while turned off. Setting the GPS position will allow the Magellan Maestro to compute which satellites are available and calculate the position quicker. 1. From page 2 of the Main Menu, tap User Options. 2. Tap GPS Options. 3. Tap Set GPS Position. 4. Follow the prompts to enter the address where you currently are. 5. Tap Done when finished entering the address. User Options 50