Magellan RoadMate 1200 Manual - English - Page 12
Fundamentals, Turning the Triton on, Setting the display backlight intensity, Setting the Time Zone - battery
UPC - 763357119350
View all Magellan RoadMate 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Fundamentals Turning the Triton on 1. Press and hold the power button until the Triton splash screen is displayed. Turning the Triton off When turning off the Triton you can select to have it shutdown or go into suspend mode. 1. Press the Power button and the Triton will begin the shutdown sequence. 2. To place the Triton in suspend mode, press Enter before the shutdown sequence is complete. 3. To cancel the shutdown sequence and return to the last viewed screen, press any key. 4. If after 5 seconds no key has been pressed, the Triton will shutdown. Setting the display backlight intensity Depending upon the lighting conditions you are in you may need to change the backlight settings for the display. Press the backlight button momentarily to step through each level of backlight intensity. 1. Press the backlight button momentarily. The backlight intensity will increase 20% until it reaches the maximum intensity. Pressing the backlight button again will turn off the display backlight. Please note that reducing the backlight setting will increase the battery life for the Triton. Sometimes reducing the backlight intensity is so slight so as not to be noticeable yet will still conserve power. Refer to the section in this chapter on Battery Life for other tips on extending the Triton's battery life. Note: maximum backlight intensity is reduced as battery capacity gets lower. Press button momentarily Setting the Time Zone The time and date information will be computed from information from the GPS satellites so there is no requirement for you to input any time or date information. However, to make the time accurate for your location you must select the correct time zone. 1. From the Map screen press MENU. 2. Select View. 3. Select Settings. 4. Scroll down and select Date & Time. 5. Select the Time Zone field. Fundamentals 4