Magic Chef MCP13E1ST User Manual - Page 10

Operation Procedure Microwave Oven

Page 10 highlights

OPERATION PROCEDURE (MICROWAVE OVEN) This section includes useful information about microwave oven operation. 1. Plug power supply cord into a standard 3- pronged 20Amp, 120V AC 60Hz power outlet. 2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray and roller guide must always be in place during cooking. 3. Shut the door. Make sure that it is firmly closed. 1 The oven light is on when the microwave oven is operating. 2 The oven door can be opened at any time during operation by pressing the door release button on the control panel. The oven will automatically shut off. 3 Each time a pad is touched, a BEEP will sound to acknowledge the touch. 4 The oven automatically cooks on full power unless set to a lower power level. 5 The display will show ":0" when the oven is plugged in. 6 Time clock returns to the present time when the cooking time ends. 7 When the PAUSE/CANCEL pad is touched during the oven operation, the oven stops cooking and all information retained. To erase all information (except the present time), touch the PAUSE/CANCEL pad once more. If the oven door is opened during the oven operation, all information is retained. Touch the PAUSE/CANCEL pad for microwave oven control part. During operation of the microwave oven, pads for pizza oven control part do not work. 8 If the START/EXPRESS COOK pad is touched and the oven does not operate, check the area between the door and door seal for obstructions and make sure the door is closed securely. The oven will not start cooking until the door is completely closed or the program has been reset. Make sure the oven is properly installed and plugged into the electrical outlet. WATTAGE OUTPUT CHART • The power-level is set by touching the POWER LEVEL pad. The chart shows the display, the power level and the percentage of power. Touch POWER pad once twice 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times 11 times Power Level (Display) P-HI P-90 P-80 P-70 P-60 P-50 P-40 P-30 P-20 P-10 P-00 9 Approximate Percentage of Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

9
once
P-HI
100%
twice
P-90
90%
3 times
P-80
80%
4 times
P-70
70%
5 times
P-60
60%
6 times
P-50
50%
7 times
P-40
40%
8 times
P-30
30%
9 times
P-20
20%
10 times
P-10
10%
11 times
P-00
0%
The oven light is on when the microwave oven
is operating.
The oven door can be opened at any time
during operation by pressing the door release
button on the control panel. The oven will
automatically shut off.
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show ":0" when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the PAUSE/CANCEL pad is touched
during the oven operation, the oven stops
cooking and all information retained.
To erase all information (except the present
time), touch the PAUSE/CANCEL pad once
more. If the oven door is opened during the oven
operation, all information is retained.
If the START/EXPRESS COOK pad is touched
and the oven does not operate, check the area
between the door and door seal for obstructions
and make sure the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
OPERATION PROCEDURE (MICROWAVE OVEN)
This section includes useful information about microwave oven operation.
1. Plug power supply cord into a standard 3- pronged 20Amp, 120V AC 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.
Touch the PAUSE/CANCEL pad for microwave
oven control part.
During operation of the microwave oven, pads
for pizza oven control part do not work.
WATTAGE OUTPUT CHART
• The power-level is set by touching the POWER LEVEL pad. The chart shows the display, the power
level and the percentage of power.
Touch POWER pad
Power Level (Display)
Approximate Percentage of Power