Magnavox 19MF339B User Manual - Page 31

INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION 5 Energy Saving Mode You can set whether the power consumption is saved or not. 5 Adjust the setting. Auto Adjustment Use [Cursor K/L] to select "Adjust", then press [OK]. PICTURE SOUND SETUP FEATURES LANGUAGE To automatically synchronize the phase and clock on the TV and PC. Cancel Adjust • The horizontal/vertical position, clock and phase of the PC screen are automatically adjusted. Horizontal Position, Vertical Position Use [Cursor s/B] to adjust. Horizontal Position H. Position 0 - + Adjust Move OK OK Vertical Position V. Position 0 - + Adjust Move OK OK Cursor s to move PC screen left to move PC screen down Cursor B to move PC screen right to move PC screen up 1 Press [MENU] to display the main menu. 2 Use [Cursor K/L] to select "FEATURES", then press [OK]. PICTURE SOUND SETUP FEATURES LANGUAGE Closed Caption Child Lock PC Settings Energy Saving Mode Location Current Software Info On Home 3 Use [Cursor K/L] to select "Energy Saving Mode", then press [OK]. PICTURE SOUND SETUP FEATURES LANGUAGE Closed Caption Child Lock PC Settings Energy Saving Mode Location Current Software Info On Home Clock, Phase Use [Cursor {/B] to adjust "Clock" setting to stabilize the PC screen and "Phase" setting to improve the clarity of the PC screen. Cursor s Cursor B Clock Clock 0 Adjust Move Phase OK OK to decrease to increase setting value setting value Phase 0 Adjust Move OK OK 6 Press [MENU] to exit. 4 Use [Cursor K/L] to select the desired mode, then press [OK]. PICTURE SOUND SETUP FEATURES LANGUAGE On Off When set to "On",power consumption is reduced by decreasing backlight brightness. On Select if you want to reduce the power consumption. The power consumption may possibly Off exceed the limited requirement of the ENERGY STAR® qualification. Note: • You may not obtain an appropriate screen with "Auto Adjustment" for some signals. In this case, adjust the settings manually. • Adjust "Phase" setting after "Clock" setting has been properly adjusted. 5 Press [MENU] to exit. 31 EN