Magnavox 20MS334R User manual, English (US) - Page 8
Cable Box with RF In/Out Jacks, Cable Box with, Audio/Video Out Jacks
View all Magnavox 20MS334R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CABLE BOX CONNECTIONS If you have a Cable Box, follow either set of these steps to complete your connections. Cable Box with RF In/Out Jacks This connection will not supply Stereo sound to the TV. The sound from the Cable Box will be monaural (singlechannel, not left and right). 1 Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box. 2 Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the Cable Box. 3 Connect the other end of the coaxial cable to the TV's 75Ω jack. Screw it down finger tight. 4 Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3 or 4. Set the TV to the same channel. When watching TV programming, change channels at the Cable Box, not the TV. Cable TV signal from the Cable Company 1 CABLE IN 75Ω Coaxial Cable 2 TO TV 3 4 OUTPUT CH 3 4 ANT 75‰ 75Ω jack on rear of Television Cable Box with Audio/Video Out Jacks This connection will supply Stereo sound to the TV. 1 Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box. 2 Using an RCA-type video cable, connect one end of the video cable to the Video Out jack of the Cable Box. Connect the other end of the cable to the yellow VIDEO In jack on the front of the TV. Video cables are usually marked with yellow and are available from Magnavox or electronics retailers. Video jacks on most equipment are yellow. 3 Using RCA-type, stereo audio cables, connect one end of the cables to the left and right Audio Out jacks of the Cable Box. Connect the other end of the cables to the red and white AUDIO L/R (left/right) In jacks on the front of the TV. Audio cables are usually marked with red and white and are available from Magnavox or electronics retailers. The right audio jack is red and the left audio jack is white. Match the cable colors to the jack colors. 4 Press the CH +/- buttons to set the TV to the FRONT channel. (Go to your lowest channel, for example channel 1, then change channels down to find FRONT.) When watching TV programming, change channels at the Cable Box, not the TV. VIDEO L AUDIO R MENU - VOLUME + CHANNEL 1 Cable TV signal VIDEO L AUDIO R 2 Video cable (yellow) MENU - VOLUME + CHANNEL 3 Audio cables (red and white) OUTPUT CH 3 4 CABLE TO IN TV VIDEO L R AUDIO OUT OUT Cable Box 8