Magnavox 51MP6100D User manual, English (US) - Page 23
Block Channels Part
View all Magnavox 51MP6100D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BLOCK CHANNELS PART 2 After your personal access code has been set (see previous page), you are now ready to select the channels you want to block out or censor. Once you've entered your access code and the AutoLock™ features are displayed on the screen: 1 Press the CURSOR UP v or DOWN wbut tons until the words Block Channel are high lighted. 2 For digital mode: Press the CURSOR RIGHT ubutton to enter the Channel Blocking menu. Press OK to lock or unlock the channel. For analog mode: Press the CURSOR RIGHT ubutton to block the channel. A padlock symbol will appear on the right of the channel number. If you decide not to block the channel, press the CURSOR RIGHT ubutton again to remove the block (The padlock symbol disappears). 3 Repeat steps 1-2 to block another channel. 4 When finished, press the EXIT/INFO button to remove the menu from the screen. NOTE: If you ever forget your code, the 0, 7, 1, 1 code is the factory default and can be used to enter and create a new access code. Enter the above number twice. Using the Features Menu HELPFUL HINT Use the A/D button on the Remote Control to switch between Digital and Analog channels. 23