Magnavox 51MP6200D User manual, English (US) - Page 29
Connect Accessory Device
View all Magnavox 51MP6200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connect Accessory Devices 1 Set Top Box to TV Using HDMI A Connect RF cable from wall to input at back of the cable box. Set output switch on set-top box to CH 3 or 4 and tune TV to same channel. In some cases, cable box will automatically tune to channel 3 or 4. Just change channels until picture appears. B Connect cable box to TV using HDMI cable. Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. You need to also connect the audio cable to L and R AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and select HDMI. Using RF Cable A Connect RF cable from wall to input at the back of the cable box. B Use second RF cable to connect the cable box to the TV's antenna input. This connection gives mono sound. For stereo sound use also composite audio/video connection (Refer to panel 3). 2 DVD Player or DVD Recorder to TV Using HDMI A Connect DVD player/DVD recorder to the TV using HDMI cable. B Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on remote control to tune to the video supplied by HDMI. Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection. C 3 DVD Player or DVD Recorder to TV Using Composite Video Input (YPbPr) A Insert Component Video connectors into their corresponding jacks on both DVD player/DVD recorder and TV (Y, Pb and Pr). B Connect red/white audio cables into the audio output jacks on DVD player/ DVD recorder and audio AV inputs on TV. C Turn on TV and DVD player/DVD recorder. Press AV on remote control until the connected source appears on TV screen. Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection. 21