Magnavox MBP6700P/F7 Owners Manual English - Page 42
to select the desired setting IP Address / Subnet Mask / Default Gateway / Primary DNS / Secondary
View all Magnavox MBP6700P/F7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Manual setup In the following cases, configure each setting as necessary. -- When connection test failed with auto setting. -- When instructed by your Internet service provider to make specific settings in accordance with your Network environment. 1. Press [HOME] and use [ ] to select "Setup" in the home menu, then press [OK]. 2. Use [ ] to select "Network", then press [OK]. 3. Use [ ] to select "Network installation", then press [OK]. 4. Use [ ] to select "Start", then press [OK]. 5. Use [ ] to select "Manual setup", then press [OK]. 6. Use [ ] to select the desired setting (IP Address / Subnet Mask / Default Gateway / Primary DNS / Secondary DNS), then press [OK]. • The range of input numbers is between 0 and 255. • Use [ ] to move between input fields. Use [ [RETURN]. ] changes the number by 1. If you want to exit this setting, press 7. When all items are entered, use [ ] to select "Continue", then press [OK]. 8. Use [ ] to select "Yes" or "No" for proxy server, then press [OK]. • If you use a proxy server, select "Yes" then press [OK] to go to the next step. • If you do not use a proxy server, select "No" then press [OK] to go to step 12. 9. "Proxy Address" setting screen will appear. Enter a proxy address using the cursor buttons, the color buttons, and [OK]. 10. Press [RED] to go to the "Proxy Port" setting screen. • If you Use [ screen. ] to select "Done" then press [OK] instead of [RED], you can go to the "Proxy Port" setting 11. Use [ ] to change the proxy port number, then press [OK]. 12. Connection test confirmation screen will appear. Select "Yes", then press [OK] to start the connection test. The test result will appear right after the connection test finishes. 13. "Network connection succeeds." will be displayed. Select "Finish", then press [OK] to complete the settings. DD Not • Enter an IP address after checking the specifications of your router. • If an IP address is unknown, check the IP address of other devices (e.g. PC connected with a LAN cable). Then, in the fourth cell to the right, assign a different number from those other devices. • Enter the DNS addresses provided by your Internet Service Provider. • If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address. • The range of input numbers for the port number is between 0 and 65535. (This number must be no greater than 65535.) • For proxy port, certain ports might be closed, blocked or unusable depending on your network environment. • When the settings are changed, the network connection may be disabled depending on the device. EN 42