Magnavox MC194EMG User manual, English (US) - Page 41
Helpful Hints cont
View all Magnavox MC194EMG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Helpful Hints (cont'd) 41 The remote control is not available and you need to access the menu. • Press CHANNEL v or w on the front of the TV/VCR to go to channel zero or AUX. Press CHANNEL v once to access the TV/VCR menu. Use the PLAY, REW, F.FWD, and STOP/EJECT buttons on the front of the TV/VCR to go through the menu. Press CHANNEL v on the front of the TV/VCR again to remove the menu and go to your lowest TV channel. (Press CHANNEL w on the front of the TV/VCR again to remove the menu and go to AUX.) Some menus, such as TIMER PROGRAMMING or SETTING CLOCK, can be removed only by turning off the TV/VCR. Details are on page 12. TV/VCR power shuts off after 15 minutes. • The TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast signal (for example, a station that has gone off the air for the night). This is normal. TV/VCR does not have a picture. • Adjust the antenna or check the Cable TV signal. Details are on page six. • Select an active channel. TV/VCR has poor sound or no sound. • Adjust the volume. • Press the MUTE button to restore the volume. Tape playback is poor or tape is destroyed. • Adjust the tracking. Details are on page 38. • Use the Rental feature. Details are on page 30. • If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 40. TV/VCR does not display closed captions. • Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper. • Closed captions are available for TV programming only, not videotape playback. Details are on page 35. Remote control does not operate TV/VCR. • Aim the remote control directly at the remote sensor on the front of the TV/VCR. Details are on page 12. • Remove all obstacles between the remote control and the TV/VCR. • Inspect and replace the batteries in the remote control. Details are on page five. Number buttons will not select channels above 69. • Enter channel numbers as a two-digit number. If you want to select channels 100 and above, press the +100 button, then the Number buttons for the last two digits. • If you are using an antenna and do not have Cable TV service, only channels 2-69 will be available. You cannot insert a tape into the TV/VCR. • Insert the videotape with the window side up, with the record tab facing you and to the left. • Make sure a tape isn't already in the TV/VCR by pressing the STOP/EJECT button on the front of the TV/VCR. • Gently push on the center of the tape. Never force a tape into the TV/VCR. • If you have set a timer recording and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing. You cannot remove the tape from the TV/VCR. • Make sure the power plug is completely connected to a power outlet. • If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording. • Unplug the TV/VCR power cord for five minutes. Plug in the power cord again, then press the POWER button on the TV/VCR. If the tape does not eject, press the STOP/EJECT button on the TV/VCR three to five times. If the tape still does not eject, you may need to have an authorized servicer remove the tape.