Magnavox MDR557H Owner's Manual - English - Page 18
Copyright protection system, HDMI Mode and Actual Output Signals, Front Panel Display
View all Magnavox MDR557H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONNECTION HDMI Mode and Actual Output Signals Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed. HDMI connection makes this unit automatically output the most suitable resolution for your TV. Front Panel Display Video Output Signal 480 Progressive Press [HDMI] Press [HDMI] 720 Progressive Press [HDMI] 1080 interlaced 1080 Progressive Press [HDMI] • The HDMI mode that is not supported by the display device will be skipped. Copyright protection system To play back the digital video images on a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is a copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information. *HDMI: High Definition Multimedia Interface Note(s) • Some devices with an HDMI input may not operate properly with this unit. • When using an HDCP-incompatible display device, the image will not be viewed properly. • Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled by another device via the HDMI connector. • The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be limited by the device that is connected. • Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output connector. • When this unit's HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable, the signals are output in digital RGB. • When a power failure occurs, or when you unplug the unit, some problems with the HDMI setting might occur. Please check and set the HDMI setting again. 18 EN