Magnavox MDR700 User manual, English (US) - Page 12

Installing the Set under a Cabinet

Page 12 highlights

English Installing the Set under a Cabinet IMPORTANT! - Never plug in the AC power cord to the power outlet before installation is completed. ● You may install the set in the kitchen with or without spacers. The recommended mounting position of the set is under a wall cabinet. See the following diagram: AC power cord Cord clamp Dimensions of the player: 370mm (14.57") x 71 mm (2.80") x 270 mm (10.63") (W/H/D) Tip: - There should be at least 35mm (1.38") distance between the set and the wall. Installing procedures 1 Mark the positions of the 4 holes by using the supplied template. Drill four 1/4" diameter holes as shown. 2 If the cabinet door overhangs the shelf and obstructs the set, adjust the set or the shelf height. 3 Install the set with the supplied mounting screws. 4 Keep at least 35mm (1.38") distance between the set and the wall. CAUTION: - Since the set is rather heavy, be careful when installing. - To reduce the risk of fire, do not place any heating or cooking appliance beneath the set, especially while the LCD screen is open or on view. - Mount the set so that its AC power cord can be plugged directly into a wall outlet. - Do not use a converter or extension cord. - Install the set as far as possible from sources of interference, such as a refrigerator, microwave oven, fluorescent lamp, etc. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

12
English
Installing the Set under a Cabinet
IMPORTANT!
Never plug in the AC power cord to
the power outlet before installation is
completed.
You may install the set in the kitchen with or
without spacers.
The recommended mounting position of the set
is under a wall cabinet. See the following
diagram:
Dimensions of the player: 370mm (14.57”) x 71
mm (2.80”) x 270 mm (10.63”) (W/H/D)
Tip:
There should be at least 35mm (1.38”)
distance between the set and the wall.
Installing procedures
1
Mark the positions of the 4 holes by using the
supplied template. Drill four 1/4” diameter holes
as shown.
AC power cord
Cord clamp
2
If the cabinet door overhangs the shelf and
obstructs the set, adjust the set or the shelf
height.
3
Install the set with the supplied mounting screws.
4
Keep at least 35mm (1.38”) distance between
the set and the wall.
CAUTION:
Since the set is rather heavy, be
careful when installing.
To reduce the risk of fire, do not place
any heating or cooking appliance
beneath the set, especially while the LCD
screen is open or on view.
Mount the set so that its AC power
cord can be plugged directly into a wall
outlet.
Do not use a converter or extension
cord.
Install the set as far as possible from
sources of interference, such as a
refrigerator, microwave oven, fluorescent
lamp, etc.