Magnavox MDV456 User manual, English (US) - Page 14

E6170UD_EN_QX4_1217 12/17/04 5:44 PM Page 14 14 Hookups (cont'd) Connecting to a TV and a Stereo Stereo has red/white AUDIO IN jacks 3 LEFT AUDIO IN RIGHT AUDIO IN VIDEO IN VIDEO IN 4 AUDIO OUT L DIGITAL AUDIO OUT 2 Y CR / PR COMPONENT VIDEO OUT 1 5 COAXIAL R VIDEO CB / PB OUT S-VIDEO OUT 1 Connect the supplied red and white audio cable to the Player's red and white AUDIO OUT jacks and to the Stereo's red and white AUDIO IN jacks. Match the cable colors to the jack colors.The right jack is red; the left jack is white. 2 Connect the supplied yellow video cable to the Player's yellow VIDEO OUT jack and to the TV's VIDEO IN jack. 3 Plug in the Stereo's power cord.Turn on the Stereo and select the Auxiliary IN station or sound source. See your Stereo owner's manual for details. 4 Plug in the TV's power cord.Turn on the TV and set it to the correct Video In channel. This channel may be labeled A/V or Audio/Video, Aux or Auxiliary, EXT or External, etc.This channel is usually near channel zero, or your TV's remote control may have a button or switch that lets you select the Video In channel. Or, go to your lowest TV channel (01 or 02) and change channels downward until you find the Video In channel. If you cannot find the Video In channel, check your TV owner's manual. 5 Connect the Player's power cord to a power outlet. Press STANDBY-ON y to turn on the Player. You should see the DVD logo on the TV screen. If not, check your connections and set the TV to the correct Video In channel. Make sure PROGRESSIVE is OFF and "P.SCAN" does not appear on the Player's display panel. Details are on pages 9 and 42. Helpful Hint • You may use S-Video or Component Video instead. See pages 12-13 for these optional video connections. Remember, you only need one video connection between the TV and the DVD Player.