Magnavox MG-MTOH907L Owners Manual - Page 3
DO NOT OPEN OR REFILL/CHANGE, OIL FINS, CAUTION, Assembly Instructions
View all Magnavox MG-MTOH907L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
PARTS OF THE HEATER 1 2 3 4 DESCRIPTION PART U-Shape Bolt & Wing Nut U-Shape Bracket with Castor 5 6 QUANTITY 2 2 PARTS OF THE HEATER 1. Oil fins (x7) 2. Carry handle 3. Display 4. control panel 5. Power cord housing 6. Rolling casters DO NOT OPEN OR REFILL/CHANGE OIL FINS OIL FINS ARE PERMANTLY SEALED AND DO NOT REQUIRE REFILLING OR OIL CHANGING. ATTEMPTING TO OPEN FINS WILL DAMAGE THE UNIT. THIS UNIT IS FILLED WITH A NON TOXIC MINERAL OIL. CAUTION: DO NOT OPERATE THIS HEATER WITHOUT CASTERS ATTACHED Assembly Instructions: • Unpack the heater and remove all parts from the packaging. 1.For ease of assembly, place the heater upside down or on its side on a soft surface which will not scratch the unit. Use one hand to hold it in place. (1) 2.Unscrew nut and put U-shape bolt in one hole of bracket. (2) 3.Attach the bracket onto the heater with the U bolts and wiring nuts supplied as shown in 3, 4, 5. 4.Assemble another castor with bracket same with 2, 3, 4, 5.