Magnavox MP601 Owners Manual - Page 5
Remove & Close The Lens Cover
![]() |
View all Magnavox MP601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Remove & Close The Lens Cover Remove the lens cover before using REMOVE LENS COVER Assemble the supplied lens hood to the unit as illustrated below: CLOSE When finished, remove the lens hood from the unit: REMOVE LENS COVER LENS COVER Close the lens cover when unit not in use CLOSE LENS COVER OK Fig. 1 Fig. 2 Fig. 3 OK Fig. 4 Placing Your ProOKjector OK Your projector can be installed in four different configurations (see picture below): Front Table Front Table: Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability. Rear Table Rear Table: Select this location with the projector placed near the floor behind the screen. NOTE: A special rear projection screen is required. Front Ceiling Rear Ceiling Front Ceiling: Select this location with the projector suspended upside-down from the ceiling in front of the screen. NOTE: A projector mount is required to install the projector on a ceiling. Rear Ceiling: Select this location with the projector suspended upside-down from the ceiling behind the screen. NOTE: A projector mount is required to install the projector in a ceiling. A special rear projection screen is required. 4
![](/manual_guide/products/magnavox-mp601-owners-manual-05a332e/5.png)