Magnavox MR41806BT Owners Manual - Page 8

Operation

Get Magnavox MR41806BT PDF manuals and user guides View all Magnavox MR41806BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

BATTERY PRECAUTIONS: Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer's instructions.) 6. Do not dispose of battery in fire. Battery may explodes or leak. 7. Clean the battery contacts and also those of the device prior to battery installation. OPERATION ACTUAL TIME SETTINGS: To set or reset the actual time at first time use: 1. Connect the unit to AC power as previous procedure. The Display will illuminate and blink. 2. Press the /HR Button to set hour. (Make sure the PM Indicator on the display is light if the time is PM and not light if the time is AM). 3. Press the /MIN Button to set minute. 4. When finished, press the CLK/MEM/ Button to save the settings and exit. The display will stop blinking. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
7
BATTERY PRECAUTIONS:
Follow these precautions when using a battery in this device:
1.
Use only the size and type of battery specified.
2.
Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3.
Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4.
If the batteries in the device are consumed or the device is not to be used for a long
period of time, remove the batteries to prevent damage or injury from possible battery
leakage.
5.
Do not try to recharge the battery not intended to be recharged; it can overheat and
rupture. (Follow battery manufacturer’s instructions.)
6.
Do not dispose of battery in fire. Battery may explodes or leak.
7.
Clean the battery contacts and also those of the device prior to battery installation.
OPERATION
ACTUAL TIME SETTINGS:
To set or reset the actual time at first time use:
1.
Connect the unit to AC power as previous procedure. The Display will illuminate and
blink.
2.
Press the
/HR Button to set hour. (Make sure the PM Indicator on the display is
light if the time is PM and not light if the time is AM).
3.
Press the
/MIN Button to set minute.
4.
When finished, press the CLK/MEM/

Button to save the settings and exit. The
display will stop blinking.