Magnavox MRV660 User manual, English (US) - Page 13

English Option 2 : Using S-Video (Y/C) jack Antenna or Satellite/Cable TV signal 1 2 Connecting to TV (cont'd) 4 3 5 This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and color signal (C signal) separately. This mini DIN jack is also called a Hosiden jack. Have the following cables ready: 1) Antenna cable 2) S-Video (SVHS) cable (not supplied) 3) Audio cables (red/white) 1 Turn off your TV and remove the antenna cable from your TV (or Satellite Receiver/ Cable Box.) Insert it to the ANTENNA input jack at the back of the DVD recorder. 2 Use the supplied antenna cable to connect the DVD recorder's TV input jack to the antenna input jack at the back of your TV set. 3 Use an S-Video (SVHS) cable to connect the DVD recorder's S-VIDEO (Y/C) (OUT 2) jack to the S-Video In jack at the back of your TV set (or labeled as S-Video In or SVHS.) 4 Use an audio cable (red/white) to connect the DVD recorder's AUDIO L/R (OUT 2) jack to the audio input jack at the back of your TV set (or labeled as AV In or Audio In.) 5 Connect the power cable from the DVD recorder's ~ MAINS to the power supply. 6 Press STANDBY-ON 2 on the DVD recorder to turn it on. ➜ The message 'IS THE TV ON?' appears on the display panel. 7 Turn on the TV power. Select the correct Video In channel at the TV (see page 10.) ➜ The first installation menu { Language and Country } will appear on the TV. 8 Proceed to page 24 to continue the first installation. MRV660_17_Eng40 13 13 9/3/05, 11:46 AM 3139 246 XXXXX