Magnavox MSB4550 Owner's Manual - English - Page 15
Troubleshooting - soundbar manual
View all Magnavox MSB4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
7 Troubleshooting To keep the warranty valid, never try to repair the product yourself. Malfunctions may occur with any electrical equipment.This must not always involve a defect of the device.Therefore, check the following table to see if you can eliminate the problem yourself. Malfunction The SoundBar does not work. No sound from SoundBar speakers. A device cannot connect with the SoundBar via Bluetooth. Quality of audio play from a connected Bluetooth device is poor. The connected Bluetooth device connects and disconnects constantly. No reaction to the remote control Possible cause/ Elimination • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. • Connect the correct audio cable from your SoundBar to your TV or other devices. • On your SoundBar remote control, press the Source buttons to select the correct audio input. • Make sure that the SoundBar is not muted. Press VOL +/- to restore the sound (see 'Adjust the volume' on page 10). • Switch or set to other audio signal of your connected external device (This product support for Dolby Digital and LPCM). • The device does not support the compatible profiles required for the SoundBar. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly. • The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. • The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar. • For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar. • The battery has been exhausted, please change a new one. • Ensure the battery placed correctly. EN 13