Magnavox MSH315V Owners Manual - Page 9

OPERATION BT MODE BT (Bluetooth pairing) and play: First time use or re-pairing the unit to a new BT Device, pair as below: 1. Power on the unit by pressing and holding the /MODE Button on the top of unit approximately 2 seconds until the Blue and Green Indicators on the top of unit is illuminate and blink. 2. Wait approximately 25 seconds until the Blue Indicator is not on. (Only the Green Indicator will illuminate and blink). 3. Press the /MODE Button repeatedly until Blue Indicator begins to blink, this will access BT Mode. Note: If the unit is already added into the Wi-Fi network. Then: Power on the unit and wait approximately 25 seconds as previously instructed. The unit will automatically connect to the Wi-Fi network. The Blue Indicator will turn off and the Green Indicator/Decorative Ring will illuminate and stop blinking. Press the /MODE Button repeatedly until the Blue Indicator begins to blink, this will access BT Mode. 4. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Blue Indicator will stop blinking. 5. If pairing is complete you may now play music with your external BT Device. 6. During playback: Press the VOL + or - Buttons on the top of unit to adjust the volume level as desired. Using the controls on the paired BT Device to pause, skip tracks as usual. 7. To shut off the unit, press and hold the /MODE Button approximately 1 second then release the button. Notes: When the external BT Device searches for the unit, our model number "MSH315V" will appear on the display of external BT Device. If while pairing you are asked for a code please try "0000" or "1234". 9