Magnavox MSR90D6 Quick Start Guide - Page 3
Owner's Manual - funai
UPC - 053818570173
View all Magnavox MSR90D6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Before you start Connections Getting started Recording Owner's Manual Recordable disc • We strongly recommend for good recording quality: TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x, MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x • Discs that have been tested and are proven to be compatible with this recorder: VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4x DVD Recorder MSR90D6 Playing discs Editing Changing the Setup menu INSTRUCCIONES EN ESPAÑOL INCLUIDAS Please read before using this equipment. If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call TOLL FREE : 1 800-605-8453 or visit our web site at http://www.funai-corp.com Connection to a TV (Before you use this unit, you need to complete connections.) If your TV has AUDIO/VIDEO input jacks, see the section "Connections" on pages 13-15. If not, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below. 1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit. 2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked "ANT IN") by the RF cable. 3) Connect your RF modulator to your TV by another RF cable. 4) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables. 5) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator's manual. 6) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to. For more details, follow the instructions supplied with the RF modulator. Cable Antenna TV signal (Back of This Unit) IN OUT VIDEO IN IN L R ANTENNA AUDIO IN (E1) COMPONENT VIDEO OUTPUT S-VIDEO Y OUT PB/CB PR/CR VIDEO OUT L R AUDIO OUT 4 Audio/Video cables (supplied) 6 Turn on your TV and select channel 3 or 4. 2 5 1 RF cable (supplied) Set channel 3 or 4. (Back of TV) AC 120V ANT IN CHANNEL TO TV 3 4 STEREO AUDIO/VIDEO RF Modulator (commercially available) AUDIO IN VIDEO IN RL Antenna in jack 3 RF cable (commercially available) Note • The quality of picture may become poor if this unit is connected to an RF modulator. To record a program easily, refer to "Easy DVD recording" on pages 16-17 after connections are completed. (You CANNOT record on any copyright protected DVD disc with this unit.) Others Español