Magnavox MTFT716n Owners Manual - Page 18

SYSTEM SETUP Setting Menus: In no disc mode, press the SETUP Button, the setting menu will appear on the screen as below. Using the Direction Buttons to select and highlight the function you need to set or reset. Press the ENTER Button on the unit or OK Button on the Remote Control to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit. - - General Setup Page - - TV Shape Angle Mark OSD Lang Screen Saver Last Memory Wide On Eng On Off Go To General Setup Page In General Setup Page: 1. If TV Shape is selected, using the Direction and ENTER/OK Buttons to set the aspect ratio to match the aspect ratio of the playing movie and connected external television. 2. If Angle Mark is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set to On, when multi-angles are available in the playing DVD, the multi-angle logo will appear on the screen. 3. If OSD Lang (On Screen Display Language) is selected, using the Direction and ENTER/OK Buttons to set the OSD language as desired. 4. If Screen Saver is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set to On, the screen saver will come on when the unit idle or the image is paused over approxiately five minutes. 5. If Last Memory is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set to On, the unit will start playback from the point where the disc was stopped last time. In Speak er Setup Page: If Downmix is selected, using the Direction and ENTER/OK Buttons to set it to Lt/Rt; Stereo as desired. ~ If set to Lt/Rt, the rear left and rear right channels will plays on both Left and Right Speakers. ~ If set to Stereo, the rear left channel will plays on Left Speaker; the rear right channel will plays on Right Speaker. - 17 -