Magnavox MVR430MG User manual, English (US) - Page 10

mvr630mg.QX33 2/11/02 12:05 PM Page 10 10 Hookups with a Stereo TV MVR630MG 1 antenna or cable to ANT(enna) IN Jack VIDEO (yellow) and AUDIO (red and white) OUT Jacks 2 Video Cable Audio and Video IN Jacks on TV 3 Stereo Audio Cable q Audio and Video cables are not supplied. MVR430MG 1 antenna or cable to ANT(enna) IN Jack VIDEO (yellow) and AUDIO (white) OUT Jacks 2 Video Cable 3 "Y" splitter Audio Cable Audio and Video IN Jacks on TV 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR, then con- nect the other end of the video cable to the VIDEO IN Jack on your TV. 3 MVR630MG Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the VCR, matching cable colors to the jack colors.Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV, again matching cable colors to the jack colors. If your TV's AUDIO IN jacks or your stereo audio cable ends are not color coded, connect the red (right) AUDIO OUT jack of the VCR to the right AUDIO IN jack on the TV. Connect the white (left) AUDIO OUT jack of the VCR to the left AUDIO IN jack on the TV. The AUDIO IN jacks on your TV should be marked left and right. If they are not, consult your TV owner's manual. MVR430MG Connect an audio cable to the white AUDIO OUT jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN jack on your TV. If your TV has Right and Left AUDIO IN jacks, you must use a "Y" splitter audio cable as illustrated to deliver audio to the TV's right and left channels. 4 Turn on your TV, making sure it is in Line Input mode. This might be referred to as the TV's A/V IN or Audio/Video In channel, External or EXT channel, or AUX or Auxiliary In channel. Please refer to your TV owner's manual for details.