Magnavox P-12NPE Portable AC owners manual - Page 8

Installation Note: Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of the following two installation methods. Type 1: Hung Window Installation Foam seal B (Adhesive type-shorter) Foam seal A (Adhesive type) Window slider A Window slider B (if required) Insert the window slider adaptor into the hole of the window slider. Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown. Foam seal C (Non-adhesive type) Cut the non-adhesive foam seal C strip to match the width of the window. Insert the seal between the glass and the window frame to prevent air and insects from getting into the room. Insert the window slider assembly into the window opening. Type 2: Sliding Window Installation Foam seal B (Adhesive type-shorter) Foam seal A (Adhesive type) Window slider B (if required) Window slider A Security Bracket 2 Screws If desired, install the security bracket with 2 screws as shown. Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown. Insert the window slider assembly into the window opening. 7