Majority Hifi 200 English User Manual - Page 7

*OTUSVDUJPO
(VJEF *OTUSVDUJPO
(VJE&F/ 563/*/(
5)&
6/*5
0/0'' 1. In standby mode, push POWER/STANDBY on the main unit or remote control to turn the unit ON. The unit will turn on, the last selected input mode icon will show on the LCD display. 2. To turn the unit OFF (into standby), push POWER/STANDBY on the main unit or remote control again. The LCD DISPLAY will go dim and show the current time. The standby mode indicator lights. 4&55*/(
5)&
$-0$, After plugging the DC power adapter into the unit for the first time, "00:00:00" will appear on the LCD display. If you can receive a DAB+ signal at your location, the unit will synchronize to the current local time. After approximately one minute, the unit will switch into standby mode. To set the time manually: 1. Press the STANDBY button to switch the device to standby mode. 2. Press and hold the CLOCK SET button on remote control or TIME SET button on the unit until TIME SETUP is shown on the display. 3. Press the CLOCK SET button to set 12 or 24 hour format. 4. Use the or buttons to select the desired format and press CLOCK SET to confirm. 5. Then use the or buttons to select SET CLOCK on the display. 6. Press the CLOCK SET button to confirm. 7. The hour display flashes. Press the or buttons to set the hour. 8. Press the CLOCK SET button to confirm. n 9. The minute display flashes. Press the or buttons to set the minutes. 10. Press the CLOCK SET button to confirm.