Makita 3706 Owners Manual - Page 6
Functional, Description, Assembly
View all Makita 3706 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 001624 1 2 Adjusting depth of cut To adjust the shoe, turn the thumb screw to loosen. Slide the shoe to the desired position and tighten the thumb screw securely. Check for the proper clearance beneath the workpiece before cutting so that the bit will not strike a hard surface such as the floor, workbench, etc. 1. Shoe 2. Thumb screw 1 OFF Switch action 001625 ON 2 CAUTION: • Before plugging in the tool, always check to see that the switch lever actuates properly and returns to the ''OFF'' position. To start the tool, move the switch lever to the ''ON'' position. To stop the tool, move the switch lever to the ''OFF'' position. This can be done in the forward area of the switch lever or by bumping off the rear area of the switch lever. 1. Switch lever 2. Bump off switch ASSEMBLY 6 CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing bit CAUTION: • Do not tighten the collet nut without inserting a bit, or the collet cone will break.