Makita 5057KB Owners Manual - Page 11
Operation
View all Makita 5057KB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 1. Dust box 2. Screws 001413 Removing or installing saw blade 1 CAUTION: • Be sure the blade is installed with teeth pointing up at the front of the tool. • Use only the Makita wrench to install or remove the blade. To remove the blade, first remove the clamping screws which secure the dust box, then remove the dust box. Press the shaft lock so that the blade cannot revolve and use 001422 the wrench to loosen the hex bolt counterclockwise. Then remove the hex bolt, outer flange and blade. 2 1 1. Wrench 2. Shaft lock 1 2 4 3 1. Saw blade 2. Hex bolt 3. Outer flange 4. Inner flange 001439 To install the blade, follow the removal procedure in reverse. BE SURE TO TIGHTEN THE HEX BOLT CLOCKWISE SECURELY. After installing the blade, install the dust box and tighten the clamping screws to secure the dust box. When changing blade, make sure to also clean upper and lower blade guards of accumulated sawdust. Such efforts do not, however, replace the need to check lower guard operation before each use. OPERATION CAUTION: • Be sure to move the tool forward in a straight line gently. Forcing or twisting the tool will result in overheating the motor and dangerous kickback, possibly causing severe injury. 11