Makita 5402NA Owners Manual - Page 13

1 2 1. Clamp screw 2. Rip fence (Guide rule) 001976 Rip fence (Guide rule) The handy rip fence allows you to do extra-accurate straight cuts. Simply slide the rip fence up snugly against the side of the workpiece and secure it in position with the screw on the front of the base. It also makes repeated cuts of uniform width possible. MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. 001977 Adjusting for accuracy of 90° cut (vertical cut) 1 2 This adjustment has been made at the factory. But if it is off, adjust the adjusting screw with the hex wrench while squar- ing the blade with the base using a triangular rule, try square, etc. 1. Adjusting screw 2. Base 1 001978 2 1. Trianglar rule 2. Hex wrench 13