Makita 6903VDWE Owners Manual - Page 9
Assembly
View all Makita 6903VDWE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 1. Switch trigger 002813 Switch action CAUTION: • Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. 1 A B 1. Reversing switch 002820 Reversing switch action This tool has a reversing switch to change the direction of rotation. Slide the reversing switch to the A side (appear "F" marking) for clockwise rotation or to the B side (appear "R" marking) for counterclockwise rotation. CAUTION: • Always check the direction of rotation before operation. • Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 12 mm (15/32") 001266 9 mm (3/8") Installing or removing driver bit or socket bit Use only the driver bit or socket bit shown in the figure. Do not use any other driver bit or socket bit. 9