Makita 6953 Owners Manual - Page 7
Assembly
View all Makita 6953 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY 1 2 CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Selecting correct socket Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. Installing or removing socket CAUTION: • Always be sure that the tool is switched off and unplugged before installing or removing the socket. 001644 To install the socket, push it onto the anvil of the tool until it locks into place. To remove the socket, simply pull it off. 1. Socket 2. Anvil 1 1. Hook 2. Expand Hook The hook is convenient for temporarily hanging the tool. This can be removed without using a tool. This can be installed on either side of the tool. Installing and removing hook 001645 Expand the upper part of the hook in both directions and remove it. To install the hook, follow the removal procedure in reverse. 2 7