Makita 9920 Owners Manual - Page 8

ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 003501 Installing or removing abrasive belt 1 Pull the lever all the way out and install the belt over the roll- ers, then return the lever to the original position. 1. Lever 003376 CAUTION: • When installing the belt, make sure that the direction of the arrow on the back of the belt corresponds to the one on the tool itself. more than 6mm (1/4") 1. Steel plate 2. Adjusting knob 003380 Adjusting belt tracking 1 Switch on the tool and make sure that the belt is aligned properly. If the edge of the belt extends beyond the edge of the base or the edge of the belt retracts more than 6 mm (1/4") away from the edge of the base, use the adjusting knob to adjust the belt tracking. 2 2 1. Dust bag 2. Dust spout 003385 Dust bag 1 Attach the dust bag onto the dust spout. The dust spout is tapered. When attaching the dust bag, push it onto the dust spout firmly as far as it will go to prevent it from coming off during operation. 8