Makita ADRM08 Instruction Manual - Page 6
Installing or removing slide battery, cartridge Fig. 3 and 4, Indicating the remaining battery,
View all Makita ADRM08 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Power by battery The following table indicates the operating time on a single charge. Battery capacity 1.5Ah 2.0Ah 3.0Ah 4.0Ah 5.0Ah 6.0Ah Battery Cartridge Voltage 10.8V -12Vmax 18V BL1016 BL1815N BL1021B BL1041B BL1820B BL1830/ BL1830B BL1840B BL1850B BL1860B AT SPEAKER OUTPUT = 100mW (unit: Hour) (Approximately) AUX IN Bluetooth AUX IN Bluetooth +USB(2.1A) +USB(2.1A) 12 11 1.0 9.5 9.0 1.5 15 14 1.0 13 12 2.0 18 17 3.0 31 28 2.5 25 24 4.0 32 31 5.5 39 37 6.5 Installing or removing slide battery cartridge (Fig. 3 and 4) • To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. • If you can see the red indicator on the upper side of the button, it is not locked completely. Install it fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. • To remove the battery cartridge, sliding it from the tool while pressing the button on the front of the cartridge. Note: When the speaker is in low battery, the middle LED will flash in red. Indicating the remaining battery capacity Only for battery cartridges with "B" at the end of the model number 1 2 1. Indicator lamps 2. Check button Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for few seconds. 5 ENGLISH