Makita AN611 Owners Manual - Page 12
Nose adapter, Loading nailer
View all Makita AN611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Nose adapter CAUTION: Always lock the trigger and disconnect the hose before installing or removing the nose adapter. When nailing workpieces with easily-marred surfaces, use the nose adapter. It is factory installed at the rear of the tool. Attach the nose adapter to the contact arm (see right). When not in use, store the nose adapter at the rear of the tool to keep it from being lost. Nose piece storing portion Contact arm \ a-t Nose adapter Loading nailer I CAUTION: Always lock the trigger and disconnect the hose before loading the nailer. Select nails suitable for your work. Depress the latch lever and open the door and magazine cap. Lift and turn the coil support plate to set it to the correct step. When loading 57 or 65 mm (2-1/4", 2-1/2") long nails, use the bottom step. When loading 45 or 50 mm (1-3/4", 2") long nails, use the middle step. When loading 32 or 38 mm (1-1/4", 1-1/2") long nails, use the top step. If the tool is operated with the coil support plate set to the wrong step, poor nail feed or malfunction of the tool may result. I 12 Coil support plate