Makita BO5041 Owners Manual - Page 6

pad. Be careful to align the holes in the abrasive disc with those in the pad. CAUTION: • If you peel off the abrasive disc from the pad, its adhesion will become poor. Never attempt to stick it onto the pad for further use. Installing dust bag 1. Dust bag 1 010746 Install the dust bag on the tool so that the Makita logo on the dust bag will be upright (not upside down). Emptying dust bag 1. Dust nozzle 1 003323 When the dust bag is about half full, switch off and unplug the tool. Remove the dust bag from the tool. Then remove the dust nozzle from the dust bag after unlocking the dust nozzle by turning it slightly counterclockwise. Empty the dust bag by tapping it lightly. 1. Dust nozzle Installing paper dust bag 2 1 1. Groove 2. Front fixing cardboard 3. Front side of paper dust bag 3 003742 Place the paper dust bag on the paper dust bag holder with its front side upward. Insert the front fixing cardboard of the paper dust bag into the groove of the paper dust bag holder. 1 1. Claws 2. Upper part 2 003743 Then press the upper part of the front fixing cardboard in arrow direction to hook it onto the claws. 1. Notch 2. Guide 003744 2 1 1 003326 After emptying the dust bag, install the dust nozzle on the dust bag. Turn the dust nozzle slightly clockwise to lock it in place. Then install the dust bag on the tool as described in "Installing dust bag". 003745 Insert the notch of the paper dust bag into the guide of the paper dust bag holder. Then install the paper dust bag holder set on the tool. 6