Makita BO6050J BO6050 Instruction Manual - Page 6

Protector Installing side grip 1 1 1. Protector The protector prevents the pad, the tool housing and the wall from being damaged when working near a wall. Always use the protector when working. To install the protector, align the tongue of the protector with the groove, and push in the protector. To remove the protector, pull the protector forward. 1. Side grip Screw the side grip on the tool securely. The side grip can be installed on either side of the tool. Installing or removing abrasive disc CAUTION: Always use hook-and-loop system abrasive discs. Never use pressure-sensitive abrasive discs. 1 1 2 1. Protector 2. Groove ASSEMBLY CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. 1. Abrasive disc To install the abrasive disc or the hook-and-loop type pad (optional accessory), first remove all dirt and foreign matter from the pad. Then attach the abrasive disc to the pad, using the hook-and-loop system of the abrasive disc and the pad. Be careful to align the holes in the abrasive disc with those in the pad. To remove the disc from the pad, just pull up from its edge. Changing pad CAUTION: Make sure the new pad is installed securely. Otherwise the pad may come off from the tool and cause personal injury. 6 ENGLISH