Makita EB5300TH EB5300TH/WH Instruction Manual - Page 11

Before Starting The, Engine

Get Makita EB5300TH PDF manuals and user guides View all Makita EB5300TH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

1 2 ► 1 . Long/short pipe 2. Blower nozzle 6. Make sure all clamps are tight. Check if the trottle valve moves correctly along with the throttle movement. BEFORE STARTING THE ENGINE Checking and refill of engine oil CAUTION: When refilling with engine oil, stop the engine and wait for the engine to cool down. Otherwise skin burn may result. NOTICE: Use of deteriorated oil will cause irregular start-up. NOTICE: Remove dust or dirt near the oil refill port before detaching the oil cap. Also, keep the detached oil cap free of sand or dust. Otherwise, any sand or dust adhering to the oil cap may cause irregular oil circulation or wear on the engine parts, which will result in troubles. 1 2 ► 1 . Upper limit mark 2. Lower limit mark If the throttle cannot be fully pulled or the throttle does not return to the correct position, refer to the MAINTENANCE section for throttle valve adjustment. Inspection Put the blower on a flat surface and remove the oil cap. Make sure that the oil level is within the upper and lower limit marks. If the oil is not up to the lower limit, fill up with new oil. Change the oil whenever it becomes dirty or significantly changes color. (Refer to "Replacing engine oil" for the oil change procedure and frequency.) 11 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
11
ENGLISH
1
2
►
1.
Long/short pipe
2.
Blower nozzle
6.
Make sure all clamps are tight. Check if the
trottle valve moves correctly along with the throt-
tle movement.
If the throttle cannot be fully pulled or the throttle
does not return to the correct position, refer to
the MAINTENANCE section for throttle valve
adjustment.
BEFORE STARTING THE
ENGINE
Checking and refill of engine oil
CAUTION:
When refilling with engine
oil, stop the engine and wait for the engine
to cool down.
Otherwise skin burn may result.
NOTICE:
Use of deteriorated oil will cause
irregular start-up.
NOTICE:
Remove dust or dirt near the oil
refill port before detaching the oil cap. Also,
keep the detached oil cap free of sand or
dust.
Otherwise, any sand or dust adhering to
the oil cap may cause irregular oil circulation
or wear on the engine parts, which will result in
troubles.
1
2
►
1.
Upper limit mark
2.
Lower limit mark
Inspection
Put the blower on a flat surface and remove the
oil cap.
Make sure that the oil level is within the upper
and lower limit marks. If the oil is not up to the
lower limit, fill up with new oil.
Change the oil whenever it becomes dirty or
significantly changes color. (Refer to “Replacing
engine oil” for the oil change procedure and
frequency.)