Makita FS2200 Owners Manual - Page 5
Assembly
View all Makita FS2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Lighting up the lamps 1. Lamp The hook is convenient for temporarily hanging the tool. ASSEMBLY 1 009967 CAUTION: • Do not look in the light or see the source of light directly. To turn on the lamp, pull the trigger. Release the trigger to turn it off. NOTE: • Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. Reversing switch action 1. Reversing switch lever A 1 B 009962 CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing the bit To remove the bit, first remove the locator by pulling the lock ring away from the gear housing. 1. Lock ring 2. Gear housing 1 2 009964 Grasp the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Sometimes, it helps to wiggle the bit with the pliers as you pull. To install the bit, push it firmly into the magnetic bit holder. Then install the locator by pushing it firmly back onto the gear housing. 1 1. Locator 2. Bit 3. Gear housing CAUTION: • Always check the direction of rotation before operation. • Use the reversing switch only after the tool comes to a complete stop. Changing the direction of 2 3 rotation before the tool stops may damage the tool. 010169 This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to the position (A side) for clockwise rotation or the position (B side) for counterclockwise rotation. Hook 1 1. Hook 009963 5