Makita GS5000 Owners Manual - Page 7
Operation
View all Makita GS5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Tool with the outer flange (convex type) 3 4 1. Hex nut 2. Outer flange (convex type) 3. Grinding wheel 4. Spindle 1 2 013671 Tool with the outer flange (flat type) 3 1. Hex nut 4 2. Outer flange (flat type) 3. Grinding wheel 4. Spindle OPERATION CAUTION: • Apply light pressure on the tool. Excessive pressure on the tool will only cause a poor finish and overloading of the motor. • The grinding wheel continues to rotate after the tool is switched off. • Hold the tool firmly with one hand on the switch handle and the other hand on the front grip when performing the tool. 1 2 013672 Securing method for tool with the both types outer flanges 1. Screwdriver 1 2. Hex wrench 3. Inner flange 2 4. Hex nut 013600 Hanger (optional accessory) 3 4 013670 Insert screwdriver into the hole in the inner flange. Grip the hex nut with the wrench, turning in the direction of wheel rotation to loosen the hex nut. Remove the hex nut and outer flange. Then install the wheel, outer flange and hex nut. Tighten the hex nut in the direction of arrow as shown in the figure. 013599 Continuous operation of the grinder is made easy by using the handy hanger as shown in the figure. Simply loop the cord over the head or shoulder, after threading it through the eyelet on the top of the tool housing. 7