Makita HM1203C Owners Manual - Page 2

ENGLISH (Original instructions) SPECIFICATIONS Model Blows per minute HM1213C HM1203C 950 - 1,900 min-1 Overall length 576 mm Net weight 10.8 kg 9.7 kg Safety class II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END201-4 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE045-1 Intended use The tool is intended for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories. ENF002-1 Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. Uncertainty (K) : 2.5 dB(A) Wear ear protection ENG216-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-6: Work mode : chiseling function with side handle Vibration emission (ah,CHeq) : 7.0 m/s2 Uncertainty (K) : 1.5 m/s2 For Model HM1203C ENG102-2 For European countries only Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 81 dB(A) Sound power level (LWA) : 95 dB(A) Uncertainty (K) : 2 dB(A) Wear ear protection ENG216-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-6: Work mode : chiseling function with side handle Vibration emission (ah,CHeq) : 15.5 m/s2 Uncertainty (K) : 1.5 m/s2 ENG901-1 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. • The declared vibration emission value may also be used in a preliminary assessment of exposure. For Model HM1213C ENG102-2 For European countries only Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 75 dB(A) Sound power level (LWA) : 95 dB(A) WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking 2