Makita HM1307CB Owners Manual - Page 7

1 1. Hammer grease 010291 Then replenish with fresh grease (60g). Use only Makita genuine hammer grease (optional accessory). Filling with more than the specified amount of grease (approx. 60 g; 2 oz) can cause faulty hammering action or tool failure. Fill only with the specified amount of grease. To reassemble the tool, follow the disassembling procedure in reverse. For model HM1317CB only 1. Rear cover 1 2. Hex wrench 2 010289 Remove the six screws using a hex wrench and remove the rear cover. 1 1. Crank cap cover Then replenish with fresh grease (60g). Use only Makita genuine hammer grease (optional accessory). Filling with more than the specified amount of grease (approx. 60 g; 2 oz) can cause faulty hammering action or tool failure. Fill only with the specified amount of grease. To reassemble the tool, follow the disassembling procedure in reverse. CAUTION: • Be careful not to damage the brush holder unit and carbon brushes especially when installing the rear cover. • Do not reuse the six bolts but use new ones in the reassembling since these bolts are applied with adhesive. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Bull point • Cold chisel • Scaling chisel • Clay spade • Rammer • Hammer grease • Safety goggles • Plastic carrying case 010295 Pull out the crank cap cover in the direction of arrow and remove it. 1. Hammer grease 1 010296 7