Makita HS7600 Instruction Manual - Page 6

Fig.1 000147 Fig.2 33. Only use the saw blade with the diameter that is marked on the tool or specified in the manual. Use of an incorrectly sized blade may affect the proper guarding of the blade or guard operation which could result in serious personal injury. 34. Keep blade sharp and clean. Gum and wood pitch hardened on blades slows saw and increases potential for kickback. Keep blade clean by first removing it from tool, then cleaning it with gum and pitch remover, hot water or kerosene. Never use gasoline. 35. Wear a dust mask and hearing protection when use the tool. SAVE THESE INSTRUCTIONS. 000150 28. Before setting the tool down after completing a cut, be sure that the lower guard has closed and the blade has come to a complete stop. 29. Never attempt to saw with the circular saw held upside down in a vise. This is extremely dangerous and can lead to serious accidents. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. USD201-2 Symbols The followings show the symbols used for tool. ･ volts ･ amperes ･ hertz ･ alternating current ･ no load speed ･ Class II Construction ･ revolutions or reciprocation per minute 000029 30. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. 31. Do not stop the blades by lateral pressure on the saw blade. 32. Do not use any abrasive wheels. 6