Makita JV0600K Owners Manual - Page 2

ENGLISH (Original instructions) SPECIFICATIONS Model JV0600 Length of stroke 23 mm Blade type B type Max. cutting capacities Wood Mild steel Strokes per minute (min-1) 90 mm 10 mm 500 - 3,100 Overall length 236 mm Net weight 2.4 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END201-5 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE019-1 Intended use The tool is intended for the sawing of wood, plastic and metal materials. As a result of the extensive accessory and saw blade program, the tool can be used for many purposes and is very well suited for curved or circular cuts. ENF002-1 Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. ENG905-1 Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 85 dB(A) Sound power level (LWA) : 96 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection ENG900-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Work mode : cutting boards Vibration emission (ah,B) : 10.5 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode : cutting sheet metal Vibration emission (ah,M) : 5.5 m/s2 Uncertainty (K) : 1.5 m/s2 ENG901-1 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. • The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 2