Makita KP312 Owners Manual - Page 10

1 3 1. Drum plate 2. Installation bolt 3. Set plate screw 4. Set plate 5. Planer blade 6. Adjusting screw 7. Drum 1. Socket wrench 2. Wrench holder 3. Rear base 003879 2 4 5 6 7 Blade height adjustment Blade height adjustment is usually not necessary. However, if you notice that the blade edge is below the level of the rear base or protrudes too far from the rear base, proceed as follows. Loosen the eight installation bolts and the set plate screws. Turn the adjusting screws clockwise to retract the blade or counterclockwise to protrude it. After adjusting the blade height, tighten the set plate screws and the eight installation bolts securely. 003882 Socket wrench storage When not in use, store the socket wrench as shown in the figure to keep it from being lost. 1 2 3 10