Makita LXDG01Z Owners Manual - Page 8
Accessories
View all Makita LXDG01Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1. Holder cap cover 2. Screwdriver 1 2 011473 Insert the top end of slotted bit screwdriver into the notch in the tool and remove the holder cap cover by lifting it up. 1. Brush holder cap 2. Screwdriver 1 2 011474 Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. Reinstall the holder cap cover on the tool. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ACCESSORIES 011470 When using the side handle, remove the rubber protector, insert the side handle on the tool barrel as far as it will go and rotate it to the desired angle. Then tighten the handle firmly by turning clockwise. CAUTION: • When using the tool without handle, always install the rubber protector on the tool. • When installing the rubber protector, always push it onto the tool so that the top round recessed shape of the rubber is positioned near the switch position. . • Wheel points • Collet cone (1/4", 1/8") • Collet nut • Wrench 13 • Side handle set • Various type of Makita genuine batteries and chargers CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Side handle (optional accessory) 011467 8