Makita LXLM01W Owners Manual - Page 3

ENGLISH (Original instructions) Explanation of general view 1. Red part 2. Button 3. Battery cartridge 4. Switch 5. Light 6. Band 7. Velcro section 8. Ring SPECIFICATIONS Model Power source LED Operating time Dimensions Net weight (With battery cartridge) LXLM01 D.C 18.0 V 0.48 W Approx. 15 hours (BL1815) Approx. 30 hours (BL1830) 151 mm (5 - 15/16") (L) x 81 mm (3 - 3/16") (W) x 60 mm (2 - 3/8") (H) 0.60 kg (1.32 lbs) • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS. 1. Read this instruction manual and the charger instruction manual carefully before use. 2. This light is not waterproof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do not wash it in water. 3. A short-circuit can cause a large current flow, overheating, possible burns and even a breakdown. (1) Do not touch the inside of the light with tweezers, metal tools, etc. (2) Do not touch the battery terminals with any conductive material. (3) Avoid storing the battery cartridge in a container with any metal objects such as nails, coins, etc. 4. Never expose the battery cartridge to flames, fire or great heat. Breakage may cause release of injurious material. 5. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 6. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 7. Be careful not to drop, shake or strike battery. 8. When the tool is not in use, always switch off and remove the battery cartridge from the tool. 9. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). 10. Do not give the tool a shock by dropping, striking, etc. 11. Do not expose the light to eyes continuously. It may hurt them. 12. Do not cover or clog the lit tool with cloth or carton, etc. It may create a risk of fire. 13. Do not disassemble the charger or battery cartridge; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 14. If any problem develops, consult your nearest Makita Service Center or dealer. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service Center. SAVE THESE INSTRUCTIONS. FUNCTIONAL DESCRIPTION CAUTION: 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA rechargeable batteries. Other types of batteries may burst causing personal injury and damage. 4. Non-rechargeable batteries cannot be charged with this battery charger. 5. Use a power source with the voltage specified on the nameplate of the charger. 6. Do not charge the battery cartridge in presence of flammable liquids or gases. 7. Do not expose charger to rain or snow. 8. Never carry charger by cord or yank it to disconnect from receptacle. 9. After charging or before attempting any maintenance or cleaning, unplug the charger from the power 3