Makita MAC210Q MAC100Q Instruction Manual - Page 3
Specifications
View all Makita MAC210Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
SPECIFICATIONS Model MAX Output Power SCFM @ 90 PSIG Cut-In Pressure Cut-Out Pressure Bore x Stroke x Qty Voltage -Single Phase Hz Motor RPM Lubrication Tank Size Weight Dimensions (L x H x W) Outlet Max Pressure CSA/US Listed MAC100Q 350 W 0.7 51 mm x 8 mm x 2 1 gal (3.8 L) 12.5 kg (27.6 lbs) L: 328 mm (12-7/8") W: 370 mm (14-1/2") H: 282 mm (11-1/8") MAC210Q 800 W 2.0 105 PSIG (0.72 MPa) 135 PSIG (0.93 MPa) 64 mm x 14 mm x 2 120 V AC 60 Hz 1,750 min-1 Oil-Less 2 gal (7.6 L) 20.5 kg (45.2 lbs) L: 441 mm (17-3/8") W: 429 mm (16-7/8") H: 347 mm (13-5/8") 135 PSIG (0.93 MPa) Yes MAC320Q 1100 W 2.6 64 mm x 17 mm x 2 3 gal (11.4 L) 23.8 kg (52.5 lbs) L: 456 mm (18") W: 481 mm (19") H: 348 mm (13-3/4") • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. Minimum Circuit Requirement: 15 AMPS * A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating as the branch circuit the air compressor is operated on. If the air compressor is connected to a circuit protected by fuses, use time delay fuses. IMPORTANT Read the Safety Guidelines and ALL instructions carefully before operating. www.makitatools.com www.makita.ca 3