Makita ML011G Instruction Manual - Page 1
Makita ML011G Manual
View all Makita ML011G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
ML011G EN Cordless Worklight FRCA Lampe de Chantier Sans Fil ESMX Linterna de Trabajo Inalámbrica 1 3 INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES 4 9 10 1 2 25 11 2 4 5 6 12 14 3 7 8 6 Ⅰ 12 Ⅱ Ⅲ Ⅳ 14 13 13 ENGLISH (Original instructions) Explanation of general view 1 Battery cartridge 2 Red indicator 3 7 Top LED (4 pcs.) 8 Side LED (4 pcs.) 9 13 Ring 14 Strap hole I Button 4 Indicator lamps 5 Check button 6 Light switch USB power supply port 10 USB power supply switch 11 Warm color cover 12 Strap with hook (optional accessory) All LED (8 pcs.) light up II Side LED (4 pcs.) light up III Top LED (4 pcs.) light up IV OFF SPECIFICATIONS Model: LED Dimensions (L × W × H) (Without battery cartridge) Rated voltage Net weight (without battery cartridge) USB power supply port Operating time (approximate) BL4020 BL4025 BL4040 BL4050F BL4080F ML011G 8 pcs 107 mm × 77 mm × 50 mm (4-1/4" × 3" × 2") D.C. 36 V - 40 V max 0.19 kg (0.42 lbs) Type A / Output voltage D.C. 5 V / Output current D.C. 2.4 A All LED (8 pcs.) Side LED (4 pcs.) Top LED (4 pcs.) 17 hours 30 hours 30 hours 23 hours 40 hours 40 hours 37 hours 64 hours 64 hours 47 hours 81 hours 81 hours 77 hours 132 hours 132 hours • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. Applicable battery cartridge and charger Battery cartridge Charger BL4020 / BL4025 / BL4040 / BL4050F / BL4080F DC40RA / DC40RB / DC40RC Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges and chargers may cause injury and/or fire. IMPORTANT SAFETY INSTRUCTIONS WARNING: When using appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS. 1. Do not look into the light, or do not expose the light to eyes. Eyes may be damaged. 2. Do not cover the lamp with cloth or carton, etc. Otherwise it may cause a flame. 3. The appliance is not waterproof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do not wash it in water. 4. Do not touch the inside of the appliance with tweezers, metal tools, etc. 5. When the appliance is not in use, always switch off and remove the battery cartridge from the appliance. 6. To prevent the tool from tipping over or falling, place it on a level, flat surface or secure it on a stable surface. Do not give the appliance a shock by dropping, striking, etc. 7. Safety information for portable luminaires with batteries. • Battery disposal should be in compliance with your local regulations that address the disposal of hazardous materials. • Do not incinerate the battery. 8. Additional information for luminaires. • The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. 9. Battery tool use and care. • WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. • Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. • Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. • Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130 °C (265 °F) may cause explosion. • Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. • Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care. 10.Important safety instructions for battery cartridge. • Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. • Do not disassemble or tamper with the battery cartridge. It may result in a fire, excessive heat, or explosion. • If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. • If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. • Do not short the battery cartridge. • Do not store and use the tool and battery cartridge in locations where the temperature may reach or exceed 50 °C (122 °F). • Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. • Do not nail, cut, crush, throw, drop the battery cartridge, or hit against a hard object to the battery cartridge. Such conduct may result in a fire, excessive heat, or explosion. • Do not use a damaged battery. • The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. For commercial transports e.g. by third parties, forwarding agents, special requirement on packaging and labeling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. • When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local regulations relating to disposal of battery. • Use the batteries only with the products specified by Makita. Installing the batteries to non-compliant products may result in a fire, excessive heat, explosion, or leak of electrolyte. • If the tool is not used for a long period of time, the battery must be removed from the tool. • During and after use, the battery cartridge may take on heat which can cause burns or low temperature burns. Pay attention to the handling of hot battery cartridges. • Do not touch the terminal of the tool immediately after use as it may get hot enough to cause burns. • Do not allow chips, dust, or soil stuck into the terminals, holes, and grooves of the battery cartridge. It may result in poor performance or breakdown of the tool or battery cartridge. • Unless the tool supports the use near high-voltage electrical power lines, do not use the battery cartridge near high-voltage electrical power lines. It may result in a malfunction or breakdown of the tool or battery cartridge. • Keep the battery away from children. 11. Tips for maintaining maximum battery life. • Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. • Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. • Charge the battery cartridge with room temperature at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery cartridge cool down before charging it. • When not using the battery cartridge, remove it from the tool or the charger. • Charge the battery cartridge if you do not use it for a long period (more than six months). SAVE THESE INSTRUCTIONS CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. FCC caution (For United States) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. ICES-005 standard (For Canada) CAN ICES-005(B) / NMB-005(B) FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the appliance is switched off and the battery cartridge is removed before adjusting or checking function on the appliance. Installing or removing battery cartridge (Fig.1) CAUTION: • Hold the appliance and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the appliance and the battery cartridge firmly may cause them to slip off your hands and result in damage to the appliance and battery cartridge and a personal injury. • Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the appliance, causing injury to you or someone around you. • Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator as shown in the figure, it is not locked completely. To remove the battery cartridge, slide it from the appliance while sliding the button on the front of the cartridge. Indicating the remaining battery capacity (Fig.2) Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for a few seconds. NOTE: • The first (far left) indicator lamp will brink when the battery protection system works. • When the two on the left side and the two on the right side of the indicator lamps light up alternately, the battery may have malfunctioned. Overdischarge protection When the battery capacity is not enough, the appliance stops automatically. In this case, remove the battery from the appliance and charge the battery. Protections against other causes Protection system is also designed for other causes that could damage the appliance and allows the appliance to stop automatically. Take all the following steps to clear the causes when the appliance has been brought to a temporary halt or stop in operation. 1. Turn the appliance off, and then turn it on again to restart. 2. Charge the battery(ies) or replace it/them with recharged battery(ies). 3. Let the appliance and battery(ies) cool down. If no improvement can be found by restoring protection system, then contact your local Makita Service Center. Lighting up the light (Fig.3) CAUTION: Do not look in the light or see the source of light directly. Press the light switch to turn on and change modes. The sequence is All LED mode / Side LED / Top LED mode / Off / All LED mode for each press. NOTE: Press and hold the light switch to turn off the light. Press the switch button again to turn on the light in the mode before turning off the light. Connecting USB devices (Fig.4) CAUTION: • Connect only devices which are compatible with the USB power supply port, otherwise it may cause malfunction to the battery holder. • Do not use a damaged USB cable. • Do not insert nails, wires, or other items into the USB power supply port. Doing so may cause short circuit, which can cause smoke or a fire. • Do not put the USB cable in your mouth. This luminaire (with the battery) can work as an external power supply for USB devices. Open the cover and connect the USB cable (not included) through the power supply port. And then connect the other end of the cable with the device. Press the USB power supply switch. The switch lights in green and the USB power supply port (with the battery) starts to supply DC5V, 2.4A. Press the USB power supply switch again to turn off the power supply. NOTE: • Before connecting USB device to the luminaire (with the battery), always backup your data of USB device. Otherwise your data may be lost by any possibility. • The luminaire may not supply power to some USB devices. • When not using or after charging, remove the USB cable and close the cover. • To save the battery power, the USB power supply switch will automatically turn off when; 30 minutes is past since the power supply is finished; or the power supply is not performed for 30 minutes. • If the remaining battery capacity become lower, the USB power supply switch will turn off and the power supply will stop to prevent overdischarging of the battery. In this case, charge the battery or replace with new one. Warm color cover (Fig.5) A detachable cover to light lens part for changing light output to warm color with high relaxation effect. Strap with hook (Fig.6) Optional accessory Install the strap on the tool as illustration. CAUTION: • Do not use the ring and strap hole for any other purpose than hanging the appliance. Otherwise personal injury may occur. • Do not install BL4050F and BL4080F when using the strap with hook. MAINTENANCE CAUTION: Always be sure that the appliance is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita appliance specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. • Strap with hook [Part No: SE00001178] • Makita genuine battery and charger. NOTE: Some items in the list may be included in the appliance package as standard accessories. MAKITA LIMITED WARRANTY Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country. United States of America: www.makitatools.com Canada: www.makita.ca Other countries: www.makita.com FRANÇAIS (Instructions originales) Explication de vue générale 1 Cartouche de pile 7 LED supérieur (4 pièces) 13 Anneau 2 Voyant rouge 3 8 LED latérale (4 pièces) 9 14 Trou de sangle I Bouton 4 Voyants lumineux Port d'alimentation USB Interrupteur 10 d'alimentation USB Toutes les LEDs (8 pièces) illuminer II LED latérale (4 pièces) illuminer 5 Bouton de vérification 6 Interrupteur de feu Couvercle 11 de couleur chaude Bracelet avec 12 crochet (accessoire optionnel) III LED supérieur (4 pièces) illuminer IV ARRÊT SPÉCIFICATIONS Modèle : DEL Dimensions (L × L × H) (sans cartouche de batterie) Tension nominale Poids net (sans cartouche de pile) Port d'alimentation USB Temps de fonctionnement (approximatif) BL4020 BL4025 BL4040 BL4050F BL4080F ML011G 8 pièces 107 mm × 77 mm × 50 mm (4-1/4" × 3" × 2") D.C. 36 V - 40 V max 0,19 kg (0,42 lbs) Type A / Tension de sortie D.C. 5 V / Courant de sortie D.C. 2.4 A Toutes les LEDs (8 pièces) LED latérale (4 pièces) LED supérieure (4 pièces) 17 heures 30 heures 30 heures 23 heures 40 heures 40 heures 37 heures 64 heures 64 heures 47 heures 81 heures 81 heures 77 heures 132 heures 132 heures • En raison de notre programme de recherche et développement en continu, les spécifications ciincluses peuvent être modifiées sans préavis. • Les caractéristiques techniques peuvent varier selon les différents pays. Cartouche et rechargeur de pile applicables Cartouche de pile Rechargeur BL4020 / BL4025 / BL4040 / BL4050F / BL4080F DC40RA / DC40RB / DC40RC Certaines des cartouches de pile énumérées ci-dessus peuvent ne pas être offertes dans votre région de résidence. AVERTISSEMENT : N'utilisez que les cartouches de pile énumérées ci-dessus. L'utilisation de toute autre cartouche de pile et chargeur peut provoquer des blessures et/ou un incendie. INSTRUCTIONS DE SÉCURITÉ IMPORTANTES AVERTISSEMENT : Lors de l'utilisation d'appareils électroménagers, des précautions de sécurité de base doivent toujours être prises pour réduire les risques d'incendie, de décharge électrique et de blessures corporelles, notamment les suivantes : LISEZ TOUTES LES INSTRUCTIONS. 1. Ne regardez pas dans la lumière ou n'exposez pas la lumière aux yeux. Cela peut endommager les yeux. 2. Ne couvrez pas le voyant avec un chiffon ou un carton, etc. Cela pourrait provoquer une flamme. 3. L'appareil n'est pas étanche. Ne l'utilisez pas dans des endroits humides ou mouillés. Ne l'exposez pas à la pluie ou à la neige. Ne le rincez pas à l'eau. 4. Ne touchez pas l'intérieur de l'appareil à l'aide de pincettes, d'outils métalliques, etc. 5. Toujours éteindre et retirer la cartouche de pile de l'appareil lorsqu'il n'est pas en fonction. 6. Afin d'éviter que l'outil bascule ou tombe, placez-le sur une surface plane ou fixez-le sur une surface stable. Ne donnez pas de choc à l'appareil en l'échappant, le frappant, etc. 7. Information en matière de sécurité pour luminaires portables avec piles. • L'élimination des piles doit être en conformité avec vos réglementations locales qui répondent à l'élimination des matériaux dangereux. • Ne brûlez pas la pile. 8. Renseignements supplémentaires sur les luminaires. • La source lumineuse de ce luminaire n'est pas remplaçable, lorsque la source lumineuse atteint sa fin de vie, le luminaire entier doit être remplacé. 9. Utilisation et entretien de l'outil sur pile. • AVERTISSEMENT : Lisez tous les avertissements de sécurité et instructions. Le non-respect de ces avertissements et instructions peut entraîner un choc électrique, un incendie et/ou des blessures graves. • Empêchez tout démarrage accidentel. Assurez-vous que l'interrupteur est en position d'arrêt avant de brancher le bloc-pile, de ramasser ou de transporter l'appareil. Le fait de transporter l'appareil avec le doigt sur l'interrupteur ou d'alimenter l'appareil avec l'interrupteur en marche risque d'entraîner des accidents. • Débranchez le bloc-pile de l'appareil avant d'effectuer des réglages, de changer des accessoires ou de ranger l'appareil. De telles mesures de sécurité préventives réduisent le risque de mettre en marche l'appareil accidentellement. • Rechargez uniquement avec le chargeur spécifié par le fabricant. Un chargeur adapté à un type de bloc-pile peut entraîner un risque d'incendie s'il est utilisé avec un autre bloc-pile. • N'utilisez les appareils qu'avec des blocs-pile spécialement conçus à cet effet. L'utilisation de tout autre bloc-pile peut entraîner un risque de blessure et d'incendie. • Lorsque le bloc-pile n'est pas utilisé, éloignez-le des autres objets métalliques, tels que trombones, pièces de monnaie, clés, clous, vis ou autres petits objets métalliques qui peuvent établir la connexion d'une borne à une autre. Court-circuiter les bornes de la pile ensemble peut causer des brûlures ou un incendie. • Dans des conditions extrêmes, du liquide peut être éjecté de la pile; évitez tout contact. En cas de contact accidentel, rincez-vous à grande eau. Si le liquide entre en contact avec les yeux, consultez un médecin. Le liquide éjecté de la pile peut causer une irritation ou des brûlures. • N'utilisez pas un bloc-pile ou un appareil endommagé ou modifié. Les piles endommagées ou modifiées peuvent être imprévisibles et provoquer un incendie ou une explosion ou elles présentent un risque de blessure. • N'exposez pas un bloc-pile ou un appareil à un feu ou à une température excessive. L'exposition au feu ou une température supérieure à 130°C (265°F) peut provoquer une explosion. • Suivez toutes les instructions de recharge et ne chargez pas le bloc-pile ou l'appareil à l'extérieur de la plage de température spécifiée dans les instructions. Une charge incorrecte ou à des températures à l'extérieur de la plage spécifiée peut endommager la pile et augmenter le risque d'incendie. • Faites effectuer l'entretien par un réparateur qualifié en n'utilisant que des pièces de rechange identiques. Cela garantira le maintien de la sécurité du produit. • Ne modifiez pas l'appareil ou le bloc-pile, et n'essayez pas de les réparer vous-même, sauf comme indiqué dans les instructions d'utilisation et d'entretien. 10.Consignes de sécurité importantes pour la cartouche de pile. • Avant d'utiliser la cartouche de pile, lisez toutes les instructions et les mises en garde sur (1) le chargeur de pile, (2) la pile et (3) le produit utilisant une pile. • Ne pas démonter ou modifier la cartouche de pile. Cela pourrait entraîner un incendie, une chaleur excessive ou une explosion. • Si le temps de fonctionnement est devenu excessivement plus court, cessez immédiatement d'utiliser l'appareil. Cette situation peut entraîner un risque de surchauffe, de brûlures et même d'explosion. • Si de l'électrolyte entre dans vos yeux, rincez-les à l'eau claire et consultez immédiatement un médecin. Cet incident pourrait entraîner une perte de la vue. • Ne court-circuitez pas la cartouche de pile. • Ne pas entreposer et utiliser l'outil et la cartouche de pile dans des endroits où la température peut atteindre ou dépasser 50 °C (122 °F). • Ne pas incinérer la cartouche de pile, même si elle est gravement endommagée ou complètement usée. La cartouche de pile peut exploser lorsque jetée dans un feu. • Ne pas clouer, couper, écraser, jeter, échapper la cartouche de pile ou frapper celle-ci contre un objet dur. Une telle conduite pourrait entraîner un incendie, une chaleur excessive ou une explosion. • N'utilisez pas une pile endommagée. • Les piles au lithium-ion sont soumises aux exigences de la législation en matière de marchandises dangereuses. Pour les transports commerciaux, par des tiers ou des agents de transport par exemple, des exigences particulières en matière d'emballage et d'étiquetage doivent être respectées. Pour la préparation de l'article à expédier, il faut consulter un expert en matières dangereuses. Veuillez également respecter les réglementations nationales probablement plus détaillées. Attachez ou masquez les contacts ouverts et emballez le bloc-pile de manière à ce qu'il ne puisse pas se déplacer dans l'emballage. • Lors de la mise au rebut de la cartouche de pile, retirez-la de l'outil et mettez-la dans un endroit sûr. Respectez les réglementations locales relatives à l'élimination des piles. • N'utilisez les piles qu'avec les produits mentionnés par Makita. L'installation des piles sur des produits non conformes peut provoquer un incendie, une chaleur excessive, une explosion ou une fuite d'électrolyte. • Si l'outil n'est pas utilisé pendant une longue période, la pile doit être retirée de l'outil. • La cartouche de pile peut accumuler de la chaleur pendant et après l'utilisation, ce qui peut provoquer des brûlures ou des brûlures de faible température. Faites attention lors de la manipulation de cartouches de pile chaudes. • Ne touchez pas la borne de l'outil immédiatement après utilisation car elle pourrait devenir assez chaude pour provoquer des brûlures. • Ne permettez pas à des copeaux, de la poussière, ou de la terre de rester pris dans les bornes, les trous et les rainures de la cartouche de pile. Cela pourrait entraîner de mauvaises performances ou un bris de l'outil ou de la cartouche de pile. • À moins que l'outil ne supporte une utilisation près de lignes électriques de haute tension, n'utilisez pas la cartouche de pile près de telles lignes. Cela pourrait entraîner un mauvais fonctionnement ou un bris de l'outil ou de la cartouche de pile.